|
Installing QuickIM messenger
The instructions below intend to help you in the QuickIM installation, but may not work for your particular phone, please post a message in the support forum if you find any errors (ex: Invalid archive or application error), your help is appreciated. In red are devices that are known to not work with QuickIM currently, and in green are devices that are known to have a working QuickIM.
Important :after the installation, please read the support forum for your phone's specific settings to remove the network permission alerts, otherwise when you use QuickIM, you'll be asked many times to give network access permission to QuickIM which is very annoying.
If you cannot find your phone in the list, simply use this link.
- Alcatel One Touch 735i, 756
- Audiovox 8450, 8920, 9950
- BenQ P30, P31
- Hitachi P300
- LG 4600, C1300, G4015, G4050, G5300, G5310, G5400, G5410, G5500, G7050, G7070, G7100, G7120, L1200, L1400, LX5350, LX5450, PM325, U8110, U8120, U8138, U8150
- Mitsubishi M750
- Motorola E550, V300, V400, V500, V505, V525, V551, V600, V620, V80
- Motorola A630, A760, A830, A835, A920, A925, A1000, C550, C650, E680, T280i, E398, RAZR V3, T720, T722i, V60i, V66i, V180, V220, V730, V750, V980, L6, L7 and others
- Motorola Accompli 008, 6288
- Motorola A388, A388c
- Motorola i50sx, i55sr, i58sr, i80s, i85s, i88s, i90c, i95cl, i730, i733, i736, i830, i860
- NEC c313, c616, e313, e616, N110
- Nokia 3410, 3510i, 3520, 3530, 3560, 3595, 6010, 8910i
- Nokia 2650, 3100, 3105, 3108, 3120, 3200, 3220, 3300, 5100, 5140, 6020, 6100, 6108, 6170, 6200, 6220, 6225, 6230, 6230i, 6585, 6610, 6650, 6651, 6800, 6810, 6820, 7200, 7210, 7250, 7260, 7600
- Nokia 3230, 3600, 3620, 3650, 3660, 6260, 6600, 6620, 6630, 6670, 6680, 7610, 7650, 7710, N-Gage, N-Gage QD, E61, E62, N80 and others
- Nokia 9500 Communicator series (9300, 9500)
- Panasonic X701
- Philips 755, 855
- Qtek 8010, 8080, 9090
- Sagem MY V-65, MY X-7
- Samsung IP-A790, MM-A700, SGH-C100, SGH-D500E, SGH-D700, SGH-P400, SGH-P510, SGH-S100, SGH-S105, SGH-S200, SGH-S300, SGH-S307, SGH-X100, SGH-X400, SGH-X427, SGH-X450, SGH-X460, SGH-X600, SGH-E700, SGH-E715, SPH-N400, SPH-A600, SPH-A660, SPH-A700 and others
- Samsung SGH-D700
- Sanyo MM-5600, MM-7400, RL-4920, RL-7300, S750, SCP-4900, SCP-5300, SCP-5400, SCP-5500, SCP-6400, SCP-7200, SCP-7300, SCP-7400, SCP-8100, SCP-8200, VM-4500
- Sendo X
- Sharp GX-i98, GX10i, GX12, GX13, GX15, GX20, GX22, GX25, GX27, GX30, GX31, GX32, TM100, TM150, V902
- Siemens 2128, A56i, A65, C55, C56, C60, C65, C66, CF62, CX65, CX70, M50, M55, M65, M55C, MC60, MT50, S55,
S56, S57, S57C, S65, SL55, SK65, SL56, ST60 and others
- Siemens SX-1
- Sony Ericsson P800, P802, P900, P908, P910
- Sony Ericsson 802SE, F500, K300, K500, K508, K600, K700, K750, S700, S710, T608, T610, T616, T628, T630, T637, V800, Z1010, Z500a, Z600, Z608, W800, P990 and others
- Toshiba VM4050
click here for instructions for the OTA (over the air) download method to download the software directly to your mobile phone
click here for instructions for the OTA (over the air) download method to download the software directly to your mobile phone
click here for instructions for the OTA (over the air) download method to download the software directly to your mobile phone
Alternatively, you can send the
q250.jad and q250.jar files to your phone by email, infrared, or
Bluetooth. Once on the phone, open q250.jad.
When using messenger with a GPRS connection, we recommend using an
Internet access point rather than a WAP access point. With an Internet access
point, you must specify 0.0.0.0 as your gateway IP address. Read the support section for the list of APNs.
click here for instructions for the OTA (over the air) download method to download the software directly to your mobile phone
click here for instructions for the OTA (over the air) download method to download the software directly to your mobile phone
click here for instructions for the OTA (over the air) download method to download the software directly to your mobile phone
click here for instructions for the OTA (over the air) download method to download the software directly to your mobile phone
To ensure a successful
network connection for QuickIM, you may need to perform the following
additional steps:
If one isn't already present, create a new Web Session for use by Java
applications:
- Select Menu -> Web Access -> Web Sessions -> [New Entry]
- Name the new entry "Java Session", set all Service Types to "HTTP", and
enter the relevant GPRS APN information for your network operator (see the support forum)
click here for instructions for the OTA (over the air) download method to download the software directly to your mobile phone
To install messenger over-the-air to your phone, go to the Java menu, select
Download, and then choose OTA. Select "Enter URL", press OK, and enter
www.quickim.com/dl/j2me/q250.jad as your OTA server.
To install messenger over-the-air to your phone, follow these steps:
- Go to the Java menu (may also be labelled Games and Applications).
- Select Download (may not be found on some devices).
- Select Setup.
- Select URL Profile Setup.
- Choose an unused profile to edit.
- For the "Profile Name", enter
QuickIM. For the "Host Name", enter
www.quickim.com/dl/j2me/q250.jad. Then press OK.
- Select Done twice.
- Select OTA (wireless) (may also be labelled Download).
- Select QuickIM as the OTA server and press OK.
To install messenger on a Motorola iDEN phone, you must use the Motorola
iDEN Java Application Loader, which is only available to registered
Motorola developers.
click here for instructions for the OTA (over the air) download method to download the software directly to your mobile phone
Once installed, you'll need to change the Internet
access option to "Ask at Start". See support section
click here for instructions for the OTA (over the air) download method to download the software directly to your mobile phone
click here for instructions for the OTA (over the air) download method to download the software directly to your mobile phone
Alternatively, you can use the
Nokia Application Installer from the Nokia PC Suite.
On Series60 phones, if this is the first time you download and install QuickIM, click on Options/App. downloads/Options/Book mark manager/Add bookmark and enter:
Name: Quickim
Address: http://quickim.com/dl/j2me/q250.jad
If your default GPRS connection is an internet access connection, use the following settings for the remaining fields:
Access point: Default
User name: <leave blank>
Password: <leave blank>
Otherwise, you may want to read the forum "Countries"
for the correct Access point settings for your operator.
After filling out all the fields, click on Options/Save. Now Quickim appears in the list.
Now each time that you want to install or upgrade Quickim, you select Quickim in this list, then click on Options/download, it will automatically download and install QuickIM for you.
An alternative method: click here for instructions for the OTA (over the air) download method to download the software directly to your mobile phone
Alternatively, you can send the
q250.jad and q250.jar files to your phone by email, infrared, or
Bluetooth. Once on the phone, open q250.jad.
When using messenger with a GPRS connection, we recommend using an
Internet access point rather than a WAP access point. With an Internet access
point, you must specify 0.0.0.0 as your gateway IP address. Read the support section for the list of APNs.
click here for instructions for the OTA (over the air) download method to download the software directly to your mobile phone
To install via desktop sync manager, download the q250.jar file to your PC, then use the application install manager to install the q250.jar file.
click here for instructions for the OTA (over the air) download method to download the software directly to your mobile phone
Alternatively, you can send the
q250.jad and q250.jar files to your phone by email, infrared, or
Bluetooth. Once on the phone, open q250.jad.
When using messenger with a GPRS connection, we recommend using an Internet
access point rather than a WAP access point. With an Internet access point, you
must specify 0.0.0.0 as your gateway IP address.
click here for instructions for the OTA (over the air) download method to download the software directly to your mobile phone
click here for instructions for the OTA (over the air) download method to download the software directly to your mobile phone
click here for instructions for the OTA (over the air) download method to download the software directly to your mobile phone
click here for instructions for the OTA (over the air) download method to download the software directly to your mobile phone
click here for instructions for the OTA (over the air) download method to download the software directly to your mobile phone
Alternatively, you can send the
q250.jad and q250.jar files to your phone by email, infrared, or
Bluetooth. Once on the phone, open q250.jad.
click here for instructions for the OTA (over the air) download method to download the software directly to your mobile phone
click here for instructions for the OTA (over the air) download method to download the software directly to your mobile phone
Alternatively, you can send the
q250.jad and q250.jar files to your phone by email, infrared, or
Bluetooth. Once on the phone, open q250.jad.
When using messenger with a GPRS connection, we recommend using an Internet
access point rather than a WAP access point. With an Internet access point, you
must specify 0.0.0.0 as your gateway IP address.
click here for instructions for the OTA (over the air) download method to download the software directly to your mobile phone
click here for instructions for the OTA (over the air) download method to download the software directly to your mobile phone
Then make a new folder and save it
there. Now you can start messenger by going to
Menu/Surf&Fun/Name_of_the_folder.
click here for instructions for the OTA (over the air) download method to download the software directly to your mobile phone
Alternatively, you can send the
q250.jad and q250.jar files to your phone by email, infrared, or
Bluetooth. Once on the phone, open q250.jad.
When using messenger with a GPRS connection, we recommend using an Internet
access point rather than a WAP access point. With an Internet access point, you
must specify 0.0.0.0 as your gateway IP address.
we suggest you to install the QuickIM for Symbian UIQ version of the software which is more specifically designed for your phone.
click here for instructions for the OTA (over the air) download method to download the software directly to your mobile phone
Alternatively, you can send the
q250.jad and q250.jar files to your phone by email, infrared, or
Bluetooth. Once on the phone, open q250.jad.
click here for instructions for the OTA (over the air) download method to download the software directly to your mobile phone
Depending on your mobile, you need to use either of the following method to download QuickIM directly to your mobile phone. Not all methods will work, you need to experiment the right one. After downloading QuickIM, you need to make sure you have the right GPRS profile configured on your phone, if QuickIM does not work out of box for you, you probably need to create a new GPRS profile. To create a new GPRS profile for internet access, you can first try the settings given here, or contact your mobile operator's customer service.
Standard edition requires phones that allow installation of midlets which size is >= 100kb, Multimedia edtion offers additional multimedia features on compatible phones and require phones that support midlet size >= 128kb
Standard edition:
OTA download (phone + WEB browser) : http://jadwap.com
OTA download (phone + WAP browser) : http://wapjad.com
Multimedia edition:
OTA download (phone + WEB browser) : http://jadwap.com
OTA download (phone + WAP browser) : http://wapjad.com
Express edition (Free):
OTA download (phone + WEB browser) : http://jadwap.com
OTA download (phone + WAP browser) : http://wapjad.com
|
|